ASSEMBLING THE BIKE ASSEMBLING THE BIKE
16
3- Unscrew 4x M6 bolt-nut you find on the backrest. M6 bolts are, compared to the M8
ones, smaller and shorter.
17
4- Mount the handlebar using 4x M6 bolt + 4x M6 nut (bolt outside, nut inside). If the bike
is equipped with the Integrated Lights Kit, fix the light cables installing the specific cable
stoppers under the box. The provided screws are self-tapping so you have freedom of
positioning. Consider that when the bike is turning the external cable gets shorter.
F
To Next Page
Loading...
