Mister-
MINI
®
Humidifier
Installation, Operation, & Maintenance Manual
7
www.trioniaq.com
Installation
Remember to select a location that is readily accessible for periodic inspection and cleaning of your humidier.
Mounting:
1. Read the instructions carefully prior to installing this product to ensure safe operation. Failure to follow these instruc-
tions could damage the humidier or cause a hazardous condition. Property damage may result from improper
installation.
2. Check the ratings given on the product to make sure it is suitable for your application. Do not install this product on
heat pump systems.
3. Tape the template (included inside the carton) in place on the duct.
4. Drill the (4) 1/8” diameter holes as indicated. These are used to secure the unit to the duct
5. Neatly cut out the 3 1/8" x 3 1/8" opening according to the "cut out on line" indicator on the template. A portion of the
unit will be inserted through this opening.
6. Remove all sharp edges and burrs to prevent damage to the unit or injury to yourself.
7. Remove the screw on the unit that secures the cover & nozzle assembly and pull back on the water tting to release
the humidier cover from the housing. All of the components inside of the unit are attached to the cover and will
come off with the cover.
8. Mount the unit housing with gasket (included) to the duct using the (4) mounting screws (included). Please refer to
the illustration on the next page for reference.
To Next Page
Loading...
