Mister-
MINI
®
Humidifier
Installation, Operation, & Maintenance Manual
8 www.trioniaq.com
Installation
Standard Wiring
This humidier is intended to be wired directly to the integrated control panel on your furnace. The electrical tap will
provide power to the humidier whenever the circulating air blower is in operation.
Read the instructions in the furnace installation manual carefully before attempting installation or operation of the humidi-
er. Failure to follow these instructions may result in improper installation and therefore, void the manufacturer's warranty.
The solenoid valve provided with the Mister-MINI is designed for 24VAC operation. Ensure that the proper diagram is
used to connect power to the unit and humidistat.
24VAC
COMMON
FURNACE
To Next Page
Loading...
