EasyManua.ls Logo

Tripp Lite NFI-U05 - Specifications

Tripp Lite NFI-U05
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Specifications
Power
Input Voltage NFI-U05: Single power input 12~
48VDC/0.15A
NFI-U08-1: Single power input 18~
30VDC/0.2A
NFI-U08-2: Single power input 12~
48VDC/0.2A
Connection NFI-U05/NFI-U08-1: 3-pin terminal block
NFI-U08-2: 2-pin terminal block
Reverse Polarity Protection Present (all models)
Power Consumption
(System Only)
NFI-U05/NFI-U08-2: 3W
NFI-U08-1: 4W
Grounding Screw Present (all models)
Interface
RJ45 5 or 8 x 10/100Base-T, auto-negotiation,
auto-MDI/MDI-X, Full/Half Duplex and Flow
Control
LED PWR (Green): Power
100 (Green): Port 1~5 or 1~8 100 Mbps
Ethernet speed
LNK/ACT (Green): Port 1~5 or 1~8 data
transmitting/receiving
Environmental
Operating Temperature -40°C to 75°C (-40°F to 167°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Operating Humidity 5 to 95% (Non-Condensing)
Storage Humidity 5 to 95% (Non-Condensing)
Operating Altitude 2000 m
Regulatory Approvals
EMI/EMC FCC Part 15
EN 55011
EN 61000-6-4
EN IEC 61000-6-2
EN 55032
EN 55024
ATTENTION: If the switch is used in a manner not specified here, the
protection provided by the switch may be impaired.

Related product manuals