Tripp Lite NGI-U08C2 - Power Input

8
Mounting and Dismounting to DIN-Rail
Power Input
Safety measures should be taken before connecting the power cable.
Turno󰀨thepowerbeforeconnectingmodulesorwires.Thecorrect
power supply voltage is listed on the product label. Check the voltage
of your power source to make sure you are using the correct voltage.
DONOTuseavoltagegreaterthanwhatisspeciedontheproduct
label. Calculate the maximum possible current in each power wire and
common wire. Observe all electrical codes dictating the maximum current
allowable for each wire size. If current exceeds the maximum rating, the
wiringcanoverheatcausingseriousdamagetoyourequipment.
CAUTION: The surface of the power output may be hot,
do not touch. Wear protective equipment before making
contact.