Tripp Lite PowerVerter APS750 User Manual (English)

To Next Page

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: APS750

PowerVerter® APS 750W Inverter/Charger with Auto-Transfer Switching and 2 Outlets

Highlights

12V DC or 120V AC input; 120V AC output; 2 outlets

750 watts continuous, 1125 watts OverPower™ and 1500 watts

DoubleBoost™ inverter output

3 stage, 20 amp selectable wet/dry cell battery charger

Auto Transfer Switching option for battery backup / UPS operation

Reliability enhanced large-transformer design with protected DC wiring

terminals

Description

Tripp Lite's APS750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a

standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or

automotive DC source. OverPower™ inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and

DoubleBoost™ inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold

start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected

equipment and the battery set is recharged via 3 stage, 20 amp charging system. In UPS mode, the APS system responds to blackouts and voltage

fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple

installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during

battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large

transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current

needs on start-up. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and

continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries

connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable

line to battery power transfer voltages.

Applications

Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion vans and

fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an uninterruptible power

supply (UPS) for items compatible with a 16.6 millisecond transfer time. NOTE: For sump pump applications, Tripp Lite recommends its "UT" Utility

Truck Inverter/Chargers.

Package Includes

APS750 Inverter/Charger

Instruction manual with warranty information

Features

APS750 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger

Supports 120V AC output from a 120V AC line power source or 12V DC battery source

16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for

equipment compatible with a one cycle transfer time

Need help?

Do you have a question about the Tripp Lite PowerVerter APS750 and is the answer not in the manual?

Tripp Lite PowerVerter APS750 Specifications

General

Output Wattage	750 W
Input Voltage	12 VDC
Output Voltage	120 VAC
Output Frequency	60 Hz
Dimensions	10.5 x 6.5 x 3.5 inches
Weight	6.5 lbs
Output Waveform	Modified Sine Wave
Waveform Type	Modified Sine Wave
Number of Outlets	2
Output Power	750W
Surge Power	1500W
Output Power Capacity	750W
Outlets	2