EasyManua.ls Logo

Tripp Lite PowerVerter RV1250ULHW - User Manual

Tripp Lite PowerVerter RV1250ULHW
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: RV1250ULHW
PowerVerter® 1250W RV Inverter/Charger with Hardwire Input/Output
Highlights
12V DC or 120V AC input; 120V AC output (hardwired)
1250 watts continuous and 2500 watts DoubleBoost inverter output
3 stage, 14/55 amp selectable wet/dry cell battery charger
Built-in Isobar® premium AC surge protection and Auto Transfer Switching
option for battery backup / UPS operation
Tested to power inverter standards UL458 (USA) and CSA (Canada)
High reliability large-transformer design with protected DC and AC wiring
terminals
Description
Tripp Lite RV1250ULHW Inverter/Charger is the quiet alternative to gas generators with no fumes, fuel or noise to deal with! It provides equipment
with utility- or generator-supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic
line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter
suitable for rugged RV applications. Supplies up to 1250 watts of continuous 120V AC power from any 12V DC battery or automotive DC source.
OverPower TM inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost TM inverter
output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools
and motorized equipment. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is
recharged via 3 stage, selectable 14/55 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a
near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user
supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and
UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with
frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup.
Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status
information (APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly
adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery
power transfer voltages.
Applications
Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion
vans and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an
uninterruptible power supply (UPS) for items compatible with a 16.6 millisecond transfer time.
Package Includes
RV1250ULHW Inverter/Charger
Instruction manual with warranty information
Features
RV1250ULHW serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
Question and Answer IconNeed help?

Do you have a question about the Tripp Lite PowerVerter RV1250ULHW and is the answer not in the manual?

Tripp Lite PowerVerter RV1250ULHW Specifications

General IconGeneral
Power Output1250W
Surge Power2500W
Input Voltage12V DC
Output Voltage120V AC
Output WaveformModified Sine Wave
CoolingFan
Output Frequency60 Hz
Outlets2
Wiring ConfigurationHardwired
Continuous Output Power1250 W
Efficiency90%
TypePower Inverter
ProtectionsOverload, Short Circuit, Over Temperature

Summary

Product Highlights

Power Output and Charging

Provides 1250W continuous and 2500W peak output with a 3-stage, selectable 14/55 amp battery charger.

Input;Output and Protection

Features 12V DC or 120V AC input, 120V AC output, Isobar surge protection, and automatic transfer switching.

Reliability and Standards

Built with a large transformer for reliability and tested to UL458 (USA) and CSA (Canada) standards.

Product Description and Applications

Description

Quiet alternative to gas generators, providing filtered AC electricity with surge protection and automatic transfer.

Applications

Versatile system for RVs, trucking, conversion vans, fleet vehicles, off-grid, and UPS applications.

Key Features and Specifications

Inverter;Charger Functionality

Automatic line-to-battery transfer, 16.6ms UPS protection, and OverPower/DoubleBoost features.

Battery Charging System

3-stage, selectable 14/55 amp charger with adjustable settings for wet/gel batteries.

Connectivity and Protection

Protected hardwire input/output lugs, automatic overload/thermal shutoff, and cooling fan.

Output Specifications

1250W continuous output, 2500W peak output, 120V nominal voltage, 60 Hz frequency.

Technical Specifications and Certifications

Input and Battery Requirements

Requires 12V DC input (95A), supports expandable battery runtime, and has selectable recharge rates.

Physical and Environmental

Unit dimensions, shipping weight, polycarbonate construction, and 0-95% non-condensing humidity.

Certifications and Warranty

Tested to UL458/CSA standards; offers 30-month US/Canada warranty and 1-year international.

Related product manuals