What to do if my Tripp Lite Inverter is overloaded?
If your Tripp Lite Inverter is experiencing an overload, it means the connected device is drawing more power than the inverter can handle. To resolve this, either use an inverter with a higher capacity or connect a device with a lower power rating.
How to fix low voltage alarm on Tripp Lite PINV750 Inverter?
If your Tripp Lite Inverter is experiencing a low voltage alarm and cutoff, start the vehicle to recharge the battery. See Resetting the Inverter for more information.
General| Output Power | 750W |
|---|---|
| Input Voltage | 12V DC |
| Output Voltage | 120V AC |
| Output Waveform | Modified Sine Wave |
| Output Frequency | 60 Hz |
| Surge Power | 1500W |
| Efficiency | 90% |
| Cooling | Fan |
| USB Ports | 2 |
To Next Page