To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite S3M30KX and is the answer not in the manual?
General| Noise level | 60 dB |
|---|---|
| Crest factor | 3:1 |
| Output power | 27000 W |
| Power factor | 0.9 |
| UPS topology | Double-conversion (Online) |
| Input frequency | 50/60 Hz |
| Maximum current | 46.6 A |
| Country of origin | China |
| Output power capacity | 30 kVA |
| Number of input phases | 3 |
| Output voltage regulation | -1 - 1 % |
| Input operation voltage (max) | 415 V |
| Input operation voltage (min) | 220 V |
| Input current Total Harmonic Distortion (THD) | 3 % |
| Safety | IEC/EN 62040-2:2006 |
| Form factor | Tower |
| Certification | IEC/EN 62040-1:2008+A1 |
| Product color | Black |
| LED indicators | Yes |
| Housing material | Steel |
| Operating altitude | 0 - 1000 m |
| Storage temperature (T-T) | -15 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Quantity per master (outer) case | 1 pc(s) |
Weight and Dimensions| Depth | 814.8 mm |
|---|---|
| Width | 300 mm |
| Height | 1000 mm |
| Weight | 264900 g |
| Package depth | 920 mm |
| Package width | 429.3 mm |
| Package height | 1205 mm |
| Package weight | 280770 g |
Proper placement guidelines for the UPS unit to ensure safety and performance.
Key safety instructions for operating the UPS system correctly and safely.
Warnings about life support applications and live output terminals on the UPS.
Essential preparation steps before UPS installation, including environmental checks.
Critical safety information regarding lethal voltages and handling of UPS batteries.
Safety precautions for UPS installation, wiring, grounding, and backfeed protection.
Step-by-step guide for connecting internal batteries, emphasizing high voltage hazards.
Instructions for installing a single UPS, including power cable and breaker requirements.
Guidance on connecting wires to UPS terminals using provided diagrams.
Steps for installing multiple UPS units in parallel for enhanced capacity.
How to connect external battery packs to the UPS for extended runtime.
How to connect devices, manage overloads, and understand UPS behavior.
Handling fault conditions and operating the UPS in maintenance mode.
Procedures for turning on parallel UPS systems in On-line and Battery modes.
Lists fault codes, events, and icons for solid fault indicators.
Guides on turning single UPS units on and off in different modes.
Procedures for charging batteries and performing battery self-tests.
Initial setup and calibration for operating UPS systems in parallel.
Adding new units to or removing units from a parallel UPS system.
Explains how to access and use the UPS setup menu for configuration.
Lists warning codes, events, and descriptions for flashing warning icons.
Steps for turning off the UPS in various conditions (utility power present or absent).
A table to diagnose and resolve common UPS operating issues and symptoms.
Safety precautions and procedures for UPS maintenance by qualified personnel.
