To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SMART500RT1U and is the answer not in the manual?
General| Type | Line-Interactive |
|---|---|
| Output Power Capacity | 500 VA |
| Output Voltage | 120V |
| Output Voltage Regulation (Line Mode) | +/- 5% |
| Output Voltage Regulation (Battery Mode) | +/- 5% |
| Input Voltage | 120V |
| Input Frequency | 50/60 Hz |
| Input Connection Type | NEMA 5-15P |
| Number of Outlets | 6 |
| Output Connections | NEMA 5-15R |
| Rack Size | 1U |
| Frequency | 50/60 Hz |
| Transfer Time | 2-4 ms |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 0-95% non-condensing |
| Battery Type | Sealed Lead Acid (SLA) |
| Runtime | Varies with load |
| Form Factor | Rackmount |
| Interface Port | USB |
| Waveform Type | Sine Wave |
| Output Power (Watts) | 300 Watts |
| Storage Temperature | -4°F to 122°F (-20°C to 50°C) |
Critical safety instructions for connecting the UPS to power sources.
Guidelines for connecting equipment to the UPS to prevent damage.
Precautions and safety information regarding UPS batteries.
Connect the UPS to a dedicated AC power outlet.
How to turn the UPS on/off and perform cold-starts.
How to silence alarms and perform a UPS self-test.
Steps to follow for troubleshooting and returning the UPS for service.
Step-by-step guide for replacing batteries in 1U UPS models.
Step-by-step guide for replacing batteries in 2U UPS models.
