To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SMART750SLT and is the answer not in the manual?
General| Type | Line Interactive |
|---|---|
| Output Power Capacity | 750VA / 450W |
| Nominal Output Voltage | 120 V |
| Output Voltage Regulation (Line Mode) | +/- 5% |
| Output Voltage Regulation (Battery Mode) | +/- 5% |
| Nominal Input Voltage | 120 V |
| Outlets | 6 |
| Outlet Type | NEMA 5-15R |
| Data Line Protection | RJ11/RJ45 |
| Form Factor | Tower |
| Input Frequency | 50 / 60 Hz |
| Battery Type | Sealed Lead Acid |
| Communication Ports | USB |
| Waveform | Sine Wave (Battery Mode) |
Warnings regarding the proper placement of the UPS unit to ensure optimal performance and safety.
Precautions for connecting the UPS to AC power outlets and avoiding improper grounding methods.
Warnings about using the UPS for life-support applications and connecting surge suppressors to the UPS output.
Safety guidelines for handling UPS batteries, including electrical shock risks and proper disposal.
Adjust the voltage dip switch to match your input voltage before connecting the UPS to AC power.
Connect the UPS to a properly grounded AC outlet on a dedicated circuit for safe operation.
Connect your computer and peripherals to the appropriate UPS outlets for backup and surge protection.
Press and hold the STANDBY button to power on the UPS and activate its protection features.
Connect your computer to the UPS for monitoring and automatic shutdown using Tripp Lite PowerAlert Software.
Connect telephone or network data lines to protect against surges on these lines.
Instructions for turning the UPS ON/OFF and performing a cold-start.
How to silence UPS alarms and perform a self-test to check battery status.
Descriptions of the LED indicators for power status, voltage correction, load level, and battery status.
Overview of UPS features including ports, accessory slots, and cooling fan operation.
Information on battery lifespan and replacement by qualified personnel, including website for parts.
Steps to carefully remove and disconnect the old batteries from the UPS unit.
Guidelines for connecting new batteries correctly, ensuring proper polarity and reassembly.
Instructions to register your Tripp Lite product online for warranty coverage and prize drawings.
Proper procedures for storing the UPS, including turning it off and periodic battery recharging.
Steps to follow for troubleshooting and obtaining service for the UPS, including contacting support.
