To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SmartPro SMART1500RMXL2Ua and is the answer not in the manual?
General| Type | Line Interactive |
|---|---|
| Output Voltage Regulation | +/- 5% |
| Output Connections | NEMA 5-15R |
| Output Receptacles | 8 |
| Input Frequency | 50 / 60 Hz |
| Input Connection Type | NEMA 5-15P |
| Form Factor | 2U Rackmount |
| Audible Alarm | Yes |
| Display | LCD |
| Output Capacity | 1350 W |
| Input Voltage | 120 V |
| Output Voltage | 120 V |
| Output Frequency | 60 Hz |
| Battery Type | Sealed Lead Acid (SLA) |
| Battery Run Time (Half Load) | 14.7 minutes |
| Dimensions | 3.5" x 17.5" x 12.2" |
| Weight | 42.1 lbs |
| Communication Interface | USB, Serial |
| Communication Ports | USB, DB9 Serial |
Warnings regarding UPS placement, ventilation, electrical connections, and safe operation.
Precautions for connecting equipment to UPS output and safe handling of UPS batteries.
Information and instructions for the environmentally responsible recycling of UPS products and batteries.
Detailed steps for installing the UPS unit into a standard 4-post rack enclosure.
Requirements and procedures for mounting the UPS in 2-post racks or on walls.
Instructions for orienting the UPS unit in an upright or tower configuration.
Steps to plug the UPS into a power source and initiate battery charging.
Instructions for connecting electronic devices to the UPS output sockets.
Procedure for powering on the UPS unit after installation and connection.
Connecting the UPS to a computer via USB or serial for monitoring and control.
Guide to connecting the UPS to an Emergency Power Off (EPO) circuit for shutdown.
Instructions for connecting external battery packs to extend UPS runtime.
Overview of the UPS LCD screen and primary control buttons (ON/OFF, MODE).
Usage of the ENTER/MUTE button and other advanced button interactions.
Detailed explanations of the various icons displayed on the UPS LCD screen.
Viewing UPS status including voltage, runtime, load percentage, and battery capacity.
Accessing and adjusting alarm settings and LCD brightness.
Performing UPS self-tests and configuring display scroll behavior.
Viewing event counts and adjusting UPS power sensitivity.
Configuring external battery settings and restoring factory defaults.
Description of rear panel connections and features like outlets, ports, and slots.
Instructions for safely storing the UPS unit when it is not in use.
Procedures for troubleshooting, obtaining service, or returning the product for repair.
Step-by-step guide for safely replacing the UPS batteries, including necessary precautions.
Detailed technical specifications for the SMART1000RMXL2U, SMART1500RM2U, and SMART1500RMXL2UA models.
Information on registering the product warranty and entering promotional drawings.
Regulatory compliance information regarding FCC Class A digital device emissions.
Explanation of product series numbers used for regulatory identification and compliance.
