CONTENTS
SPECIFICATIONS
Part no: WCA201
Suits: Most circular saws (185mm - 235mm)
Cuts: Rip, mitre, 45° bevel rip, crosscut, bevel crosscut,
compound mitre
Rip capacity: 0 - 620mm
Crosscut capacity: Up to 500mm wide
Standing size: 900mm x 600mm x 1300mm approx
Folded size: 350mm x 440mm x 1000mm approx
Standard features: 3 sided protractor (adjusts 45˚ to 0˚ to 45˚), rip fence with
45˚ bevel face, folding legs, switchbox with safety shut-off,
blade guard with dust port and kick-back protection, quick-
release saw clamps, saw side guard, crosscut
fence, guided push stick & side pressure finger kit
Optional Accessory Range: sliding extension table, router table, jigsaw kit, biscuit
joiner, finger jointer, planer attachment kit, dust collection,
bevel ripping guide, height winder, retractable wheels
Protect your hearing
Always use proper hearing protection when tool noise exceeds 85dB.
Thank you for purchasing this Triton tool. These instructions contain information necessary
for safe and effective operation of this product.
This product has a number of unique features. Even if you are familiar with this Workcentre,
please read this manual to make sure you get the full benefit of its unique design.
Keep this manual close to hand and ensure all users of this tool have read and fully understood the instructions.
Contents / Specifications
Specifications 2
Parts List 3
Safety 4
Symbols 5
Fitting the Triton Saw 6
Warranty 9
Declaration of Conformity 54
To Next Page
Loading...
Need help?
General
