Set up – Connect To PC With Analog
*
1. (See Diagram) Connect the two analog jacks on the G6 adaptor to your computer in the (green)
headset output and (pink) microphone input
2. (See Diagram) Connect the G6 adapter to the round 6-pin connector on the AX 720 headset
cable
3. (See Diagram) Set the “Amp / To PC” switch on the inline controller to “To PC”
4. Depending upon your computer’s software configurations, you may need to make adjustments
before the mic will function
*
Macintosh computers have a line level input, which does not work with the microphone level output of the AX
720. However, all recent Macs are equipped with a digital optical output. In order to use the microphone of
the AX 720 with the Macintosh, please see the section in the manual for connecting with optical to utilize the
microphone via USB
2
1
Set up – Connect To DVD Player
1. (See Diagram) Plug one end of the optical cable into
the rear of the DVD Player, plug the other end of the
optical cable into the rear of the AX 720 Amp
1
3
Amp/PC Switch
To Next Page
Loading...
Need help?
General
