6
GB
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
n
0
No load speed
opm Orbits or oscillations per minute
Ø Diameter
Hz Hertz
W, kW Watt, kilowatt
/min or min
-1
Operations per minute
rpm Revolutions per minute
dB(A) Decibel sound level (A weighted)
m/s
2
Metres per second squared (vibration
magnitude)
Technical Abbreviations Key
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Dust extraction required or recommended
For indoors use only!
Always disconnect from the power supply when adjusting,
changing accessories, cleaning, carrying out maintenance
and when not in use!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Caution!
Toxic fumes or gases!
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Specification
Model number TSPSP650
Voltage 120V
Power 5A
No load speed 1800–3200min
-1
Spindle oscillations 50–90opm
Stroke length 1/4"
Sleeve length
3"
Sleeve diameters 1/2", 3/4", 1", 1-1/2"
Protection class
Ingress protection IP20
Power cord length 6'
Dimensions (L x W x H) 10-1/4" x 3-5/16" x 10-1/4"
Weight 4.85lbs
Sound and vibration information
Sound pressure L
PA
86.4dB(A)
Sound power L
WA
97.4dB(A)
Uncertainty K 3dB
Weighted vibration a
h
4.874m/s
2
Uncertainty K 1.5m/s
2
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
Thank you for purchasing this Triton product. This manual contains information
necessary for safe and effective operation of this product. This product has unique
features and, even if you are familiar with similar products, it is necessary to read this
manual carefully to ensure you fully understand the instruction. Ensure all users of the
tool read and fully understand this manual.
Original Instructions
Introduction
As part of our ongoing product development, specifications of TRITON products may
alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
825289_Manual.indd 6 22/10/2018 12:54
To Next Page
Loading...
Need help?
General
