8
Accessories
• An extensive range of optional accessories, including several specialised, tool-specific
sharpening jigs, and replacement parts are available from your Triton stockist
Image Optional Accessory / Replacement Part Model No.
Long Knife Jig TWSLKJ
Stone Grader (replacement) TWSSG
Grinding Angle Set-Up Jig (replacement) TWSGAJ
Scissors Jig TWSSJ
Support Arm Extension TWSSAE
Carving Tool Jig TWSCTJ
Profiled Leather Honing Wheel TWSLHW
Tool Rest TWSTR
Diamond Truing Tool TWSDTT
Turning Gouge Jig TWSTGJ
Plane Camber Jig TWSPCJ
Straight Edge Jig (replacement) TWSSEJ
Pre-Dressed Coated Grindstone
(replacement)
TWSDW
Machine Cover TWSWSC
Metal Polish (replacement) TWSMP
• Replacement grinding and honing wheels are available from your Triton stockist; genuine
Triton spare parts can be obtained from toolsparesonline.com
Long Knife Jig (TWSLKJ)
Long Knife Jig Familiarisation
1. Blade Clamp
2. Adjustable Jig Stop
3. Clamp Thickness Screw
4. Jig Tightening Knob
5. Jig Stop Adjustment Knob
Using the Long Knife Jig:
• The Blade Clamp (1) is designed for holding knives of any thickness, which is fully
adjustable with the Clamp Thickness Screw (3)
• The Adjustable Jig Stop (2) can be moved into the desired position based on the knife’s size
by easily loosening Jig Stop Adjustment Knob (5), moving the Jig Stop then retightening the
Jig Stop Adjustment Knob
• Lock the Long Knife Jig by tightening the Jig Tightening Knob (4)
• Use the Support Arm to rest the jig on and use the Adjustable Jig Stop to steadily control
sharpening of the knife
Note: This jig is especially designed for use with long and thin knives, such as filleting knives.
Because the Long Knife Jig is wide, it provides ample support required for long, thin blades.
Stone Grader (TWSSG)
For dressing the grinding stone. Coarse 220 Grit. Fine 1000 Grit. (For usage instructions, see
‘Using the Stone Grader’.)
949257_Manual.indd 8 09/11/2017 15:55
To Next Page
Loading...
Need help?
General
