What to do if my Triumph Adler DCC 2725 shows a machine failure?
If your Triumph Adler Copier displays a 'Machine failure' message, try turning the main power switch off and on, or unplug the power cord and plug it back in. If the issue persists, note the error code, turn off the main power, unplug the cord, and contact your service representative.
Why Triumph Adler DCC 2725 cannot send document?
If your Triumph Adler Copier won't send a document, ensure the modular cord is correctly connected. If a communication error is displayed, resolve the error and try sending again. Also, check if the TX (transmission) restriction is activated and cancel it if necessary.
How to add paper to Triumph Adler DCC 2725 Copier?
If your Triumph Adler Copier displays 'Add paper in cassette 1 (~4). or Add paper in Multi Purpose tray', it means that the indicated cassette or MP tray is out of paper. Add paper of the same size as indicated. If a specific paper type is required, it will be displayed. To use a different paper source, select it and press [Continue]. You can also press [MP Tray Setting] to adjust the paper size/type for the MP tray. Also, ensure the cassette is securely loaded; if not, remove and reload it completely.
Why Triumph Adler Copier cannot receive document?
If your Triumph Adler Copier cannot receive a document, ensure the modular cord is correctly connected. If a communication error is displayed, resolve the error and ask the sender to retry. Also, check if the RX (reception) restriction is activated and cancel it if necessary.
What to do if Job Accounting restriction exceeded on Triumph Adler Copier?
If your Triumph Adler Copier is exceeding the Job Accounting restriction, it means the paper usage limit has been reached, preventing further operations. Press [End] to cancel the job. To proceed, reset the paper use limit and try the job again.
Why Triumph Adler Copier cannot perform broadcast transmission?
If your Triumph Adler Copier displays 'Cannot perform broadcast transmission', it indicates that there is not enough free space available in the memory. To resolve this, either send the transmission after the memory has free space, or create free space in the memory.
What to do if Triumph Adler DCC 2725 cannot perform memory reception?
If your Triumph Adler Copier says 'Cannot perform memory reception', you need to free up space in the memory. Receive after creating free space in the memory.
What to do if Triumph Adler Copier FAX box limit exceeded?
If your Triumph Adler Copier displays 'FAX box limit exceeded', it means the FAX Box capacity is full. Press [End] to cancel the current job. To proceed, print or delete data in the FAX Box to free up space, then try the job again.
What to do if scheduled sending jobs exceeded on Triumph Adler Copier?
If your Triumph Adler Copier displays 'Scheduled sending jobs exceeded', it means the limit for delayed transmission jobs has been reached. Press [End] to cancel the current job. Wait until the delayed transmissions are executed, or cancel some of them, and then try the job again.
Why Triumph Adler Copier cannot execute this job?
If your Triumph Adler Copier displays 'Cannot execute this job', it means that fax transmission is prohibited by Job Accounting. No further operation is possible. Press [End]. The job is canceled. Check the setting for Job Accounting.
General| Functions | Copy, Print, Scan |
|---|---|
| Printing Technology | Laser |
| Print Resolution | 600 x 600 dpi |
| Max Copying Resolution | 600 x 600 dpi |
| Max Printing Resolution | 600 x 600 dpi |
| Scanning Resolution | 600 x 600 dpi |
| Original Size | A3 |
| Document Feeder Capacity | 50 sheets |
| Media Weight | 60-163 g/m² |
| Standard Paper Capacity | 500 sheets |
| Paper Capacity (Standard) | 500 sheets |
| Zoom Range | 25 - 400 % |
| Interface | USB 2.0, Ethernet |
| Maximum Paper Size | A3 |
| Max Copying Speed | 25 pages/min (A4) |
| Media Size | A3, A4, A5, B4, B5 |
| Warm-up Time | 20 seconds |
| Copy Functions | Collate |
| Print Speed | 25 pages per minute |
To Next Page
