30
General Information
Ignition Key
1. Key number tag
2. Spare key blade
The ignition key operates the ignition switch
only. A different key operates the steering
lock.
When the motorcycle is delivered from the
factory, two ignition keys are supplied
together with a small tag bearing the key
number, and a spare key blade for use with
Triumph accessory alarm. Make a note of the
key number and store the spare key, key
blade and key number tag in a safe place
away from the motorcycle.
Your authorised Triumph dealer can supply a
replacement key cut from details of the key
number or can cut a new key using the
original as a master.
Ignition Switch
1. Ignition switch
2. OFF position
3. ON position
4. P (PARK) position
Switch Location
The ignition switch is located on the headlight
support bracket on the left hand side of the
motorcycle.
Switch Operation
This is a three position, key operated switch.
The key can be removed from the switch
only when it is in the OFF or P (PARK)
positions.
To turn the switch from OFF to ON, insert
the key and turn the key clockwise to the ON
position.
To turn the switch from ON to PARK, push
the key barrel further into the lock and turn
clockwise to the PARK position. Use the PARK
position only when temporarily leaving the
motorcycle in a situation where the position
lights must remain on.
To turn the key back to OFF, turn the key
anti-clockwise.
To Next Page
Loading...
Need help?
General
