454
14. Fit the crankshaft locking pin plug and tighten to 33 Nm.
1. Locking pin plug
15. Refit the spark plugs (see Spark Plugs - Check/Renew).
Perform the following operations:
• Alternator Cover - Installation
• Sump - Installation
• Engine - Installation
• Fuel Tank - Installation
• Battery - Installation
• Seat - Installation
• Start the engine and listen for a whine or rattle from the engine. If a whine or
rattle can be heard, adjust the rear balancer (see Rear Balancer Adjustment).
To Next Page
Loading...
