Triumph Rocket 3 GT 2021 - Page 513

485
Gear Selector Forks – Removal
Make sure the motorcycle is stabilised and adequately supported.
A correctly supported motorcycle will help prevent it from falling.
An unstable motorcycle may fall, causing injury to the operator or damage to the
motorcycle.
Perform the following operations:
• Seat - Removal
• Battery - Removal
• Fuel Tank - Removal
• Engine - Removal
• Clutch - Removal
• Output Shaft - Removal
NOTICE
Note the orientation of the detent arm spring for orientation.
1. Remove the detent arm spring.
2. Release the detent arm fixing, its hardened washer and remove the detent arm.
Discard the fixing.