947
7. Evenly and progressively drive the new bearing outer race into the upper end of the
headstock.
Lower Yoke - Installation
1. Lubricate the headstock bearings using Castrol LCX 222 or an equivalent heavy duty
lithium based grease.
2. Fit the bearing to the bearing inner race on the steering stem.
3. Insert the lower yoke to the frame headstock, fit the upper bearing, inner race, dust
seal and retain with the adjuster nut.
4. Make sure that the threads on the steering stem are free from grease and adjust the
headstock bearings (see Steering Head Bearing - Adjustment).
Perform the following operations:
• Upper Yoke - Installation
• Front Forks - Installation
• Battery - Installation
• Seat - Installation
To Next Page
Loading...
