MAINTENANCE AND ADJUSTMENT
144
Bonneville T100, Scrambler 900 and
Speed Twin 900
1. Wire retainer
2. Headlight bulb
3. Position bulb
To remove the headlight and position
light bulb:
▼ While supporting the light unit,
disconnect the multipin electrical
connector from the headlight bulb
and the connector from the position
light.
▼ Remove the rubber dust cover.
▼ Unhook the headlight bulb's wire
retainer.
▼ The headlight bulb can now be
removed.
▼ To remove the position light bulb,
detach the bulb holder from the
headlight body and release the bulb.
▼ Installation is the reversal of
removal.
Bonneville T120 (all models),
Speed Twin 1200 and Thruxton RS
1
2
1. Wire retainer
2. Headlight bulb
To remove the headlight and position
light bulb:
▼ While supporting the light unit,
disconnect the multipin electrical
connector from the headlight bulb.
▼ Remove the rubber dust cover.
▼ Unhook the headlight bulb's wire
retainer.
▼ The headlight bulb can now be
removed.
▼ Installation is the reversal of
removal.
▼ The position bulb is situated within
the headlight assembly and is a
sealed, maintenance-free LED unit.
To Next Page