Maintenance And Adjustment
131
Headlights
Warning
Adjust road speed to suit the visibility
and weather conditions in which the
motorcycle is being operated.
Make sure that the beam is adjusted to
illuminate the road surface sufficiently
far ahead without dazzling oncoming
traffic. An incorrectly adjusted
headlight may impair visibility causing
an accident.
Warning
Never attempt to adjust a headlamp
beam when the motorcycle is in
motion.
Any attempt to adjust a headlamp
beam when the motorcycle is in motion
may result in loss of control and an
accident.
Caution
Do not cover the headlight or lens with
any item likely to obstruct air flow to,
or prevent heat escaping from, the
headlight lens.
Covering the headlight lens during
operation with items of clothing,
luggage, adhesive tape, devices intended
to alter or adjust the headlight beam or
non genuine headlight lens covers will
cause the headlight lens to overheat
and distort, causing irreparable damage
to the headlight assembly.
Damage caused by overheating is not
considered a manufacturing defect and
will not be covered under warranty.
If the headlight must be covered during
use ‑ such as taping of the headlight
lens required during closed‑course
conditions ‑ the headlight must be
disconnected.
To Next Page
Loading...
