Maintenance And Adjustment
134
Rear Light
The rear light unit is a sealed,
maintenance‑free LED unit.
Direction Indicator Lights
Street Twin and Street Scrambler
Bulb Replacement
1. Lens
2. Indicator lens screw
3. Bulb
The lens on each indicator light is held
in place by a screw located in the body
of the light unit.
To replace the direction indicator light
bulb:
Release the screw and remove the lens
to gain access to the bulb for
replacement.
Carefully remove the bulb and replace it
with a new bulb.
Installation is the reverse of the removal
procedure.
Street Cup, Thruxton, Thruxton R,
Bonneville T100 and Bonneville T120
Bulb Replacement
1. Lens
2. Locating tangs
3. Bulb
To replace the direction indicator light
bulb:
Carefully twist the lens anticlockwise
and remove from the indicator to gain
access to the bulb.
Gently press the bulb inwards and twist
anticlockwise. Replace with a new bulb.
Installation for the bulb is the reverse of
the removal procedure.
Caution
When installing the lens, make sure
that the locating tangs are correctly
aligned to the indicator body.
To install the indicator lens, align the
locating tangs with the indicator body
and twist anticlockwise to secure.