Maintenance And Adjustment
89
Operation Description Odometer Reading in Miles (Km) or Time Period, whichever comes first
First Service Annual
Service
Mileage Based Service
Every 500 (800)
1 month
Ye ar 10,000 and
30,000 (16,000
and 48,000)
20,000
(32,000)
40,000
(64,000)
Fork oil ‑ renew ‑ •
Headstock bearings ‑ check/adjust ‑ • • • • •
Headstock bearings ‑ lubricate ‑ • •
Brakes
ABS and immobiliser ECMs ‑ check for stored
DTCs
‑ • • • • •
Brake pads ‑ check wear levels Day • • • • •
Brake master cylinders ‑ check for fluid leaks ‑ • • • • •
Brake calipers ‑ check for fluid leaks and seized
pistons
‑ • • • • •
Brake fluid levels ‑ check Day • • • • •
Brake fluid ‑ renew Every 2 years regardless of mileage
Drive Chain
Drive chain slack ‑ check/adjust Day • • • • •
Drive chain ‑ wear check Every 500 miles (800 km)
Drive chain ‑ lubricate Every 200 miles (300 km)
Drive chain rubbing strip ‑ check ‑ • • • • •
General
Fasteners ‑ inspect visually for security Day • • • • •
Bank angle indicators ‑ inspect visually for wear Day • • • • •
Side stand/Centre stand ‑ lubricate/check
operation
Day • • • • •
* Evaporative system fitted to models for certain markets only.
‡ Models with twin throttle bodies only.
To Next Page
