87
Maintenance and Adjustment
Tires
1. Tire marking
1. Wheel marking
This motorcycle is equipped with tubeless
tires, valves and wheel rims. Use only tires
marked 'TUBELESS' and tubeless valves on
rims marked 'SUITABLE FOR TUBELESS
TIRES' .
Tire Inflation Pressures
Correct inflation pressure will provide
maximum stability, rider comfort and tire life.
Always check tire pressures before riding
when the tires are cold. Check tire pressures
daily and adjust if necessary. See the
Specification section for details of the correct
inflation pressures.
Tire Wear
As the tire tread wears down, the tire
becomes more susceptible to punctures and
failure. It is estimated that 90% of all tire
problems occur during the last 10% of tread
life (90% worn). It is therefore not
recommended to use tires until they are worn
to their minimum.
Minimum Recommended Tread
Depth
In accordance with the periodic maintenance
chart, measure the depth of the tread with a
depth gauge, and replace any tire that has
worn to, or beyond the minimum allowable
tread depth specified in the table overleaf:
Incorrect tire inflation will cause abnormal
tread wear and instability problems that
may lead to loss of control and an accident.
Under-inflation may result in the tire
slipping on, or coming off the rim.
Over-inflation will cause instability and
accelerated tread wear.
Both conditions are dangerous as they may
cause loss of control leading to an accident.
To Next Page
Loading...
