9
Foreword - Safety First
Maintenance/Equipment
Consult your authorized Triumph dealer
whenever there is doubt as to the correct
or safe operation of this Triumph
motorcycle.
Remember that continued operation of an
incorrectly performing motorcycle may
aggravate a fault and may also
compromise safety.
Use of a motorcycle with bank angle
indicators worn beyond the maximum limit
(when the bank angle indicator is worn to a
minimum of 0.19 in (5 mm) in length) will
allow the motorcycle to be banked to an
unsafe angle. Therefore, always replace the
bank angle indicator pegs when they are
worn to 0.19 in (5 mm) in length. Banking to
an unsafe angle may cause instability, loss of
motorcycle control and an accident.
Ensure all equipment that is required by
law is installed and functioning correctly.
The removal or alteration of the
motorcycle’s lights, silencers, emission or
noise control systems can violate the law.
Incorrect or improper modification may
adversely affect the handling, stability or
other aspect of the motorcycle operation,
which may result in an accident causing
injury or death.
If the motorcycle is involved in an accident,
collision or fall, it must be taken to an
authorized Triumph dealer for inspection
and repair. Any accident can cause
damage to the motorcycle that, if not
correctly repaired, may cause a second
accident that may result in injury or death.
To Next Page
Loading...
