Need help?Do you have a question about the TROIKA AniCam and is the answer not in the manual?
General| Frame Rate | Up to 30 fps |
|---|---|
| Interface | USB 2.0 |
| Power | 5V |
| Magnification | 10x-200x |
| Light Source | 8 LED |
Unlocks the camera's transportation lock prior to operation.
Steps to connect the camera to PC and power supply for operation.
Customize software settings for specific roll/surface types.
Operations for opening, saving, exporting, and printing files.
Controls for showing/hiding interface elements and switching applications.
Configure capture settings, units, date format, and operation mode.
Manually adjust focus to suit the roll's radius during setup.
Save found settings for future use, overwriting or creating new ones.
Steps to manually adjust focus using up/down arrows and x8 button.
Overview of 2D and 3D measurement capabilities.
Step-by-step guide to perform a 2D measurement.
Procedure for semi-automatic cell analysis using the 2D Analysis button.
Steps for manual 2D readings, focusing on screen count calculation.
How to measure channel width using the Calculate section.
How to measure the gravure angle using the Calculate section.
Step-by-step guide to perform a 3D measurement.
Automated analysis of cell volume and depth after readings.
Simulates a cut across a cell for detailed analysis.
Displays cell profile along the green axis for measurement.
Allows defining and analyzing specific areas within cells.
How to export measurement data for analysis in other software.
Customize report appearance with logo, title, and web-link.
Guide to choosing the correct lens based on cylinder screen count.
Guide to selecting the right lens and zoom for screen counts.
Displays software version, copyright, and contact information.
To Next Page