Trojan PULSE 500 - Part List

NO. Description Specications Q’TY
A COMPUTER 1PCS
A-1 SCREWS FOR ATTACHING COMPUTER M5 x 10L 4PCS
B HANDLEBAR 1PCS
B-1 FOAM GRIP 360 x 23 x 5.0m 2PCS
B-2 FOAM GRIP 270L x 23 x 5mm 2PCS
B-3 CAP FOR HANDBLEBAR 2PCS
B-4 CABLE FOR HAND PULSE 1PCS
B-5 HAND PULSE SET 1SET
C HANDLEBAR POST 1PCS
C-1 SCREW FOR FIXING HANDLEBAR M8 x P1.25 x 16L 4PCS
C-2 CURVED WASHER 8 x 19 x 2t 4PCS
C-3 COMPUTER CABLE (UPPER) 1PCS
C-4 FRONT COVER FOR HANDLEBAR 1PCS
C-5 BOTTLE CAGE 1PCS
C-6 CONE CROSS SCREW 2PCS
C-7 BOTTLE 1PCS
D MAINFRAME 1PCS
D-1 COMPUTER CABLE (LOWER) 1PCS
D-3 SENSOR BOX 1PCS
D-4 SCREW FOR FIXING SENSOR BOX M4 x 10L 1PCS
D-5 BUSHING FOR SEAT POST 1PCS
D-6 KNOB FOR SEAT POST 1PCS
D-7 SPRING STOPPER FOR AXLE 1PCS
D-8 BEARING 6203 (RS) 2PCS
D-9 CURVED WASHER 17.5 x 25 x 0.3t 1PCS
D-10 FLAT WASHER 17.5 x 25 x 0.3t 1PCS
D-11 C-TYPE RING 17 1PCS
D-12 SCREW M4 x 10L 28PCS
D-13 R+L CHAIN COVER R+L 1SET
D-14 R+L DECORATION COVER 1SET
D-15 SCREWS M4 x 50L 7PCS
D-16 SCREWS 4PCS
D-17 CRANK ARM R+L 1SET
D-18 NYLON NUT M8xP1.0x20L 2PCS
D-19 DRIVING BELT 6 1126mm 1PCS
9. PART LIST
1064M-16