Trojan TrojanUVMax Pro10 - INSTALLING THE UV SYSTEM (Continued); Handling Glass Components Safely; Sensor and Fan Connection; GFCI Check and Leak Testing

INSTALLATION
OVERVIEWWARRANTY MAINTENANCE OPERATION
PlugCoolTouchfanintopurplereceptacle.
19
18
20
12
13
14
17
15
1611
Outletmustbe
protectedbya
GroundFault
CircuitInterrupter
(GFCI).
4
1/16
"(10.4cm)
1
2
1
2
Do not touch
glass with
bare hands.
Be sure to
rotate lamp
completely.
Letwaterflowtoonefaucetorotherwater
outlet,thenclosetheoutletandcheckfor
leaks.
ProceedtoDisinfecting The Water Lines.
Lock wireform
into position.
Plugsensor
intobluejack.
(ForProand
PlusSeries
only).
10