To Next PageTo Next Page
Need help?Do you have a question about the Trojan TrojanUVMax Pro10 and is the answer not in the manual?
Requirements and precautions for proper electrical grounding of the system.
Mandates GFCI protection for the power supply receptacle.
Essential safety measures to prevent injury and damage during operation.
Addresses problems like no power, GFCI trips, and leaks.
Solutions for leaks originating from the chamber or its components.
Troubleshooting alarms and bacterial contamination post-UV treatment.
Steps to address alarms caused by water softener cycles or sensor issues.
Procedures for cleaning the sleeve and verifying UVT levels.
How to remove mineral buildup from the quartz sleeve for optimal performance.
Information on when and how to replace the UV lamp for continued disinfection.
Detailed steps for removing the quartz sleeve and its O-rings safely.
Steps for correctly re-installing the sleeve bolt and O-rings.
Guidance on cleaning the sleeve and criteria for replacement if damaged.
Instructions for re-installing the lamp and a note for Basic Series models.
Steps and contact information for requesting warranty service.
Details on 10-year, 5-year, and 1-year limited warranties for various components.
Requirements and precautions for proper electrical grounding of the system.
Mandates GFCI protection for the power supply receptacle.
Essential safety measures to prevent injury and damage during operation.
Addresses problems like no power, GFCI trips, and leaks.
Solutions for leaks originating from the chamber or its components.
Troubleshooting alarms and bacterial contamination post-UV treatment.
Steps to address alarms caused by water softener cycles or sensor issues.
Procedures for cleaning the sleeve and verifying UVT levels.
How to remove mineral buildup from the quartz sleeve for optimal performance.
Information on when and how to replace the UV lamp for continued disinfection.
Detailed steps for removing the quartz sleeve and its O-rings safely.
Steps for correctly re-installing the sleeve bolt and O-rings.
Guidance on cleaning the sleeve and criteria for replacement if damaged.
Instructions for re-installing the lamp and a note for Basic Series models.
Steps and contact information for requesting warranty service.
Details on 10-year, 5-year, and 1-year limited warranties for various components.
General| Brand | Trojan |
|---|---|
| Model | TrojanUVMax Pro10 |
| Category | Water Filtration Systems |
| Language | English |
