Page 4
REMOTE FUNCTIONS
Power On/O
Backlit
LCD Screen
Idle/Resume
Left/Right
Steering*
2 AA Batteries
Replace by
removing
two screws
Lanyard Loop
Max Throttle
Faster
Slower
StrikeMode
TM
POWER
Power On
To power on your remote, push the Power On/O button for one
second. You will see TROLL Master on the screen. Select any function to
start using the remote.
Power O
To power o your remote, push the Power ON/O button for two
seconds until the display clears.
Sleep Mode
If you do not touch any buttons for one minute, the remote will go into
sleep mode. In order to wake it, touch any button on the remote and it
will resume to your last used function.
Batteries
The remote runs on two standard AA batteries. You will get a ‘Low
Battery’ indication on the screen when it is time to change them.
To Next Page
Loading...