EasyManua.ls Logo

TROLLMaster ProAngler - Throttle Control; Steering Control

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 5
THROTTLE CONTROL
You have a range of 1-250 to adjust your speed. This does not correlate
to your actual GPS speed. Use an external GPS in order to get an accu-
rate speed reading for your situation.
Incremental Speed Adjustment
There are two buttons to control your speed, a rabbit icon for increasing
your speed and a turtle icon to decrease your speed. Press one time on
the corresponding button to change your speed in single increments.
Rapid Speed Adjustment
If you hold down on either speed button for two seconds your incre-
ments will increase by 10. Release the button and then press once
again to go back to increasing by single increments.
Feature buttons
These two buttons will allow you to max out the throttle control
[approx. 80% of factory throttle], or return to idle.
Max Throttle
To use this feature you need to depress and hold the Max Throttle
button. You will see ‘Max Throttle appear on the screen while it is being
held down, and your motor will increase speed and stay at that Max
Throttle as long as the button is held down. To return to your previous
speed setting, release the button.
Idle/Resume
To use this feature, press the Idle button. When you do, the throttle will
drop to the 000 setting and it will say ‘Idle 000’ on the remote. To resume
your previous setting press the Idle button again. You will see ‘Resume
XXX’. The XXX will be the setting you had last been congured for.
STEERING CONTROL
When your unit is connected to a Panther Electro Steer (sold sepa-
rately,) you are able to remotely steer your kicker motor. Press once on
the Left or Right Arrow button on the remote to move in small incre-
ments. If you hold down the button it will move in larger increments.
See Installation Steps for more details.