EasyManua.ls Logo

TROLLMaster ProAngler - Troubleshooting; Service and Warranty

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 8
SERVICE AND WARRANTY
Should your unit ever require service, please do not return the product
to your dealer. Please call the number below for special instructions on
shipping and handling. Please call between 9:00 am - 4:00 pm (Central
Standard Time) Monday through Friday. If service is required and
covered by warranty, it will be repaired or replaced as described below.
If service is required and not covered by warranty, (such as damage
caused from improper trailering or from water intrusion through the
breather tube), replacement parts are available for purchase and may
be paid for by Visa or MasterCard.
The warranty coverage on this equipment is limited to the terms set
forth below: CMP Group LTD. warrants this product to be free of defects
in material and workmanship for a period of ONE (1) YEAR from the
date of original retail purchase. Positive proof of date of purchase
is required for warranty service. If service is required and covered
by warranty, the unit will be repaired or replaced with new or factory
pair to the most recent unit. If you need to replace your remote, follow-
ing this step will pair your new remote and does not store you older
remote.
9. Once everything is connected and paired, ensure that operation is cor-
rectly working by using your remote to verify that the servo (and steer-
ing) are responding to inputs. Once this has been veried, tie down any
loose cables securely.
TROUBLESHOOTING
Inputs to remote do not cause the servo or steering to respond.
Double check that your battery that is charged.
Verify that your power cables are connected securely.
Try pairing the remote one more time and ensure that the Activity
Light comes on to verify power.
Check that the screen on the remote is in fact showing any kind of
text after pushing the power button. For testing ensure there is a
clear line of sight between the remote and the receiver. Once that
works place back in your preferred location and retest.