tronical TronicalTune - Reference Tuning

BAT
e B G D A E
MENU
BAT
e B G D A
MENU
SEQUENCE
1 TUNE THE GUITAR TO THE DESIRED TUNING PRESET.
2 CHANGE THE PITCH OF ONE STRING REFERENCE STRING
BY MANUALLY TURNING THE KEY.
3 ENTER AND EXECUTE REFERENCE MODE
TO ENTER REFERENCE TUNING MODE:
PUSH “ON“ BUTTON. THE SYSTEM COMES UP WITH THE LAST COMPLETED
TUNING IN MULTISTRING MODE. PUSH “BACK“ BUTTON TO ENTER TUNING
SELECTION MODE. MENU LED IS OFF.
NOW PRESS AND HOLD THE “UP“ BUTTON UNTIL MENU LED LIGHTS UP
WHITE. PRESS “LEFT/RIGHT“ BUTTON TO SELECT “D“LED.
PRESS “ENTER“ FOR REFERENCE TUNING MODE. THE MENU LED SWITCHES
OFF, ELED FLASHES RED.
PRESS “LEFT/RIGHT“ BUTTON TO SELECT THE REFERENCE STRING.
PLUCK YOUR REFERENCE STRING MEASUREMENT BEGINS INDICATED BY
QUICK FLASHING YELLOW LED OF RESPECTIVE STRING. UPON COMPLETION
THE RESPECTIVE LED LIGHTS UP GREEN AND ALL OTHERS ARE SHINING RED.
STRUM ALL STRINGS MULTISTRING MODE.
THE SYSTEM WILL TUNE YOUR GUITAR TO THE SELECTED
TUNING PRESET IN RELATION TO THE MEASURED REFERENCE PITCH.
E
D
ENTER
BAT
e B G D A E
MENU
MOVE TO RETUNED STRING
24
THE LATEST COMPLETED REFERENCE TUNING IS AVAILABLE ON
STARTUP UNTIL YOU COMPLETE ANY OTHER TUNING.
SHOULD YOU WISH TO STORE YOUR REFERENCE TUNING REFER TO
“CUSTOM TUNING“ PAGE 2425.
WWW.TRONICAL-COMPONENTS.COM
REFERENCE TUNING
D
FUNCTION MENU
i