CALIBRATION MODE
E
PUSH “ON“ BUTTON. THE SYSTEM COMES UP WITH THE LAST
COMPLETED TUNING IN MULTISTRING MODE. PUSH “BACK“ BUT
TON TO ENTER TUNING SELECTION MODE. MENU LED IS OFF. TO
ENTER CONFIGURATION MENU PRESS AND HOLD THE “DOWN“
BUTTON UNTIL MENU AND “E“ LED LIGHTS UP LIGHT BLUE.
SELECT “E“LED AND CONFIRM WITH ”ENTER”.
TRONICAL TUNE SENSES THE CHARACTERISTIC SOLIDBORNE SOUND
OF YOUR GUITAR. THIS FEATURE IS ESSENTIAL TO ENHANCE THE
TUNING SPEED AND ACCURACY. TO GET THE BEST RESULTS STRUM
THE STRINGS DURING THE CALIBRATION PROCEDURE IN THE SAME
MANNER YOU WOULD LIKE TO STRUM THE STRINGS IN TUNEMODE.
GUITAR MUST BE TUNED TO STANDARD TUNING RED BANK “E“.
STRUM BY THUMB CLOSE TO THE NECK FOR BEST RESULTS, DO NOT
STRUM TOO HARD.
MUTE ALL STRINGS AND WAIT UNTIL ALL LEDS START TO FLASH RED.
STRUM ALL STRINGS WITHIN 1 SECOND.
CALIBRATION MEASUREMENT BEGINS.
BAT
MENU
E
ENTER
BAT
EADGBe
28WWW.TRONICAL-COMPONENTS.COM
CONFIGURATION MENU
ON/BACK
BAT
e B G D A E
MENU
ENTER
DOWN
LEFT / RIGHT
ON/BACK
i
!
To Next Page
Loading...
