Tronsmart Element Mega Bluetooth - NFC Mode; Disconnect and Pair New Device; Restore Factory Settings

NFC MODE
-4-
Confirm Bluetooth & NFC funcon are enabled on your
mobile device, and then put it on the NFC area of the
Mega speaker to pair automacally. If your mobile phone
prompts you to choose whether to accept the speaker
connecng to your phone or not, please choose ‘accept’
to make it pair with the speaker. Once paired successfully,
you can take away your phone and enjoy the music from
the speaker. Put your phone back to the NFC area again to
disconnect NFC pairing mode.
DISCONNECT A PAIRED BLUETOOTH
DEVICE AND PAIR A NEW DEVICE
Hold the ‘Play/Pause’ buon for 3 seconds ll the
indicator blinks blue, the speaker will disconnect from a
paired Bluetooth device, and you can scan ‘Tronsmart
Element Mega’ from a new Bluetooth device to pair.
RESTORE TO FACTORY SETTING
Hold the ‘Play/Pause’ buon for 5 seconds unl you hear
a voice reminder, then the speaker will power off
automacally. Then it has restored to factory sengs.
You can switch the power buon OFF and ON again to
reboot it.