3 EN
Operating manual – air cleaner AirgoClean 10 E
Information about the device
Device description
The device AirgoClean 10 E serves to filter the room air with the
aim of reducing slight and medium contaminations and odours
in order to improve the air quality. It is equipped with a powerful
fan sucking in the air at the front. The air flows through the filter
and is cleaned. Afterwards the fan releases the clean air back
into the room.
The device uses a HEPA filter to remove bacteria, viruses,
pollen, dust mite residue, mould fungus spores and other
allergens from the air. The HEPA filter has an integrated pre-
filter (made of synthetic fibre) that filters out large dust particles
before the air flows into the HEPA filter.
The HEPA filter is effective against house dust, pet allergens,
cigarette smoke, smog and particles which can carry smells and
viruses.
Additionally, the device comes with an ionization function. The
released ions remove pollen, dust, viruses and bacteria from the
room air. Thanks to this air purification method, the quality of
the room air can be additionally improved.
The three-stage fan and the uncomplicated, quick filter change
ensure easy operation.
Thanks to its compact dimensions the device can be
transported conveniently, and owing to its low-noise operation it
can be used indoors.
Device depiction
No. Designation
1 On/off switch and fan stage selector switch
2 Device cover
3 Foot
4 Air outlet
5 Air inlet
To Next Page
Loading...
