Trotec AIRGOCLEAN 10 E - Technical Data and Disposal; Technical Data; Minimum Distances for Placement; Disposal Instructions

EN 8
Operating manual – air cleaner AirgoClean 10 E
6. Insert the new HEPA filter into the device. Make sure that
the strip(9) is positioned on the outside.
9
7. Put the device cover(2) back on the device. Make sure that
the mark(6) on the device cover and the mark(8) on the
right-hand side of the device are aligned. Close the device
cover(2) by rotating it clockwise from the open(8) to the
closed position(7).
2
6
8
7
Technical annex
Technical data
Parameter Value
Model AirgoClean 10 E
Article number 1.580.001.010
Suitable room size 20m
2
/ 50m
3
Air flow rate with HEPA filter
Fan stage I
Fan stage II
Fan stage III
55 m
3
/h
105 m
3
/h
135 m
3
/h
Ambient temperature 0 °C to 35 °C
Operating range 0 % to 90 % RH
Mains connection 1/N/PE ~ 230V / 50Hz
Power consumption 45W
Nominal current 0.2 A
Sound pressure level (1 m
distance)
54.4 dB(A)
Dimensions (depth x width x
height)
183 x 272 x 296mm
Minimum distance to walls
and other objects
A: top
B: rear
C: side
D: front
30 cm
30 cm
30 cm
30 cm
Weight 2.5 kg
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.