4 EN
clamp meter BE44
Device depiction
No. Designation
1 Clamp
1a Wear indicator for clamping jaws
2 Hold button
3 Rotary switch
4 Setting buttons
5 Display
6 Input connection for measuring cable (red)
7 COM connection for measuring cable (black)
8 Lamp ON/OFF button
9 Lever for opening the clamp
10 NCVsensor
11 Test probes
12 Protection against contact
13 Red measuring cable
14 Black measuring cable
Display
18
19
17
21
22
24
29
28
27
26
25
16
30
15
20
23
No. Designation
15 Negative polarity indicator
16 Measuring scale
17 Compare mode indication
18 Diode testing indication
19 Continuity check indication
20 Overvoltage indicator
21 Unit per cent
22 Units for resistance and frequency
23 Units for capacitance
24 Measurement value display
25 Battery indication
26 Alternating current indication
27 Negative polarity indication
28 Direct current indication
29 Hold function indication
30 Automatic measuring range detection indication