Trotec BE44 - Measuring Ranges and Accuracy; Scope of Delivery

6 EN
clamp meter BE44
Measuring ranges
Measuring
range
Resolution Accuracy Measuring range
exceeded
ACvoltage (V/AC)(**)
6V
60V
600V
750V
1mV
10mV
0.1V
1V
±(0.8%
+ 5digits)
OL will be indicated
on the display.
±(1.2 %
+ 5digits)
-
(*)
DCvoltage (V/DC)(**)
6V
60V
600V
1000V
1mV
10mV
0.1V
1V
±(0.8%
+ 5digits)
OL will be indicated
on the display.
±(1.0 %
+ 5digits)
Alternating current (A/AC)
60 A 0.01 A ±(2.5 %
+ 6digits)
OL will be indicated
on the display.
600 A 0.1 A OL will be indicated
on the display.
1000 A 1 A -
(*)
Direct current (A/DC)
60 A 0.01 A ±(3.0 %
+ 10digits)
OL will be indicated
on the display.
600 A 0.1 A ±(3.0 %
+ 6digits)
1000 A 1 A
Resistance (Ω)(***)
600 Ω 0.1 Ω ±(1.0 %
+ 5digits)
OL will be indicated
on the display.
6 kΩ 1 Ω
60 kΩ 10 Ω
600 kΩ 100 Ω
6MΩ 1 kΩ ±(1.5 %
+ 5digits)
60MΩ 10 kΩ ±(3.0 %
+ 10digits)
Frequency using measuring cables(Hz)(****)
9.999 Hz 0.001 Hz ±(1.0 %
+ 5digits)
The measuring
range is set
automatically.
99.99 Hz 0.01 Hz
999.9 Hz 0.1 Hz
9.999 kHz 1 Hz
99.99 kHz 10 Hz
999.9 kHz 100 Hz
9.999 MHz 1 kHz Not specified
Measuring
range
Resolution Accuracy Measuring range
exceeded
Frequency using clamp(Hz)(****)
40 Hz -
99.99 Hz
0.01 Hz ±(1.0 %
+ 5digits)
Not specified
100 Hz -
999.9 Hz
0.1 Hz
Duty cycle(******)
5%~
95%
0.1% ±(2.0 %
+ 7digits)
The measuring
range is set
automatically.
Capacitance (C)
40nF 10pF ±(5.0 %
+ 5digits)
The measuring
range is set
automatically. If a
capacitance of
more than 4000µF
is measured,
OLwill be indicated
on the display.
400nF 100pF
4µF 1nF
40µF 10nF
400µF 100nF
4000µF 1µF Not specified
Function Range
Diode measurement Test voltage: approx. 2.5V
Test current: approx. 0.6mA
Continuity check Acoustic signal at ≤20Ω
Acoustic signal possible at 20Ω–
150Ω
No acoustic signal at >150Ω
•
(*)
: When exceeding the measuring range, the measured
value might be displayed nonetheless.
Please observe the measuring range and the overvoltage
protection! Measurements above the given measuring
range are not permitted!
• OL= outside limits
•
(**)
: internal resistance: 10MΩ
•
(***)
: open-circuit voltage <0.7V
•
(****)
: input sensitivity 1Vrms to 20Vrms
•
(*****)
: input current ≥8A
•
(******)
: input voltage: 4~ 10Vp-p,
frequency range: 4Hz~ 1kHz
Scope of delivery
• 1x Device
• 1x Red measuring cable
• 1x Black measuring cable
• 1x Label with safety information
• 3x 1.5V battery AAA
• 1x Manual