EN 3
luxmeter BF06
Intended use
Only use the device for measurements of the luminous intensity
within the measuring range specified in the technical data.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.
Improper use
Do not use the device in potentially explosive atmospheres, for
measurements in liquids and at live parts.
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Personnel qualifications
People who use this device must:
• have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
By use of the luxmeter the luminous intensity can be determined
in lux or fc(foot candle).
Further available for the assessment of the measurements is a
MAX function (maximum value).
The display illumination automatically adjusts to the ambient
light conditions.
When not in use, an automatic switch-off saves the battery.
Device depiction
No. Designation
1 Photosensor
2 MAX/LUX button
3 Tripod thread
4 Battery compartment with cover
5 Display
6 Light sensor
7 Power button
To Next Page
Loading...
Need help?
General
