Need help?Do you have a question about the Trotec BM40 and is the answer not in the manual?
General| Measurement Range (RH) | 0 to 100% RH |
|---|---|
| Display | LCD |
| Power Supply | 3 x CR2032 batteries |
| Measuring principle | Resistance measurement |
| Measuring range (Wood) | 6 to 60% |
| Measuring range (Building materials) | 0.2 to 2.0 % |
| Dimensions | 100 x 48 x 23 mm |
| Weight | approx. 50 g (including batteries) |
| Measurement Range (Wind) | Not applicable |
| Resolution (Wind) | Not applicable |
| Accuracy (Wind) | Not applicable |
| Battery Type | 9V block battery |
| Accuracy (Wood < 30 %) | +/- 2% |
| Accuracy (Wood > 30 %) | ± 4 % |
| Accuracy (Building materials) | ±0.1 % |
| Resolution | 0.1 |
| Operating humidity | 0 to 85% RH, non-condensing |
Potential dangers and hazards that remain even with proper use.
Step-by-step guide for correctly installing the battery.
Procedure for powering up the device and initial status.
How to choose the appropriate material curve for accurate measurements.
Techniques for applying the probe and obtaining accurate readings.
To Next Page
