Trotec BM40 - Transport and Storage

EN 5
moisture measuring device BM40
Technical data
Parameter Value
Model BM40
Measuring principle Dielectric/capacitive
Electrode length Approx. 40 mm
Penetration depth, non-destructive 0 mm to 50 mm
Measuring
range
Solid brick 0 % to 20 %
Anhydrite screed 0 % to 20 %
Cement screed 0 % to 20 %
Sand-lime brick 0 % to 20 %
Gas concrete 0 % to 20 %
High-insulating brick 0 % to 20 %
Concrete 0 % to 20 %
Hardwood 0 % to 50 %
Softwood 0 % to 50 %
Chipboard 0 % to 50 %
Temperature -10°C to 55°C
Resolution Wood 0.1 %
Mineral building materials 0.1 %
Temperature 0.1°C
Ambient temperature -5 to 50°C with
0 to 85%RH
Power supply 1 x 9V battery
Automatic switch-off After approx. 10min
Dimensions (length x width x height) 168 x 35 x 75 mm
Weight 220 g
Scope of delivery
• 1 x Moisture measuring device
• 1 x 9V battery
• 1 x Quick guide
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
For transporting the device use a suitable bag to protect it from
external influences.
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• protected from dust and direct sunlight
• the storage temperature complies with the values specified
in the Technical data
• Battery is removed from the device