Trotec BM12 - Device Safety and Usage; Intended Use; Improper Use; Residual Risks

EN 3
moisture measuring device BM12
Intended use
Only use the device for moisture measurements of wood and
building materials within the measuring range specified in the
technical data.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.
Improper use
Do not use the device in potentially explosive atmospheres, for
measurements in liquids or at live parts.
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Personnel qualifications
People who use this device must:
• have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
When handling the device there is a risk of injury due
to the exposed measuring tips.
Always put on the protective cap when not in use.
Caution
Keep a sufficient distance from heat sources.
Note
Exclusively use the original measuring tips included in
the scope of delivery. Other measuring tips might bend
or damage the holder at the measuring device.
Note
Never force the measuring device into the material to
be measured or yank it out. Applying force can lead to
bending or breaking of the measuring tips or to the
destruction of the housing.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
By use of the moisture measuring device BM12 the humidity
level of wood and building material can be determined.
Additionally, the ambient temperature can be measured in °C or
°F.
For the display a background illumination can be switched on as
well.
Device depiction
1
2
3
4
5
2
6
No. Designation
1 Protective cap for measuring tips
2 Measuring tips
3 Display
4 Power button
5 MODEbutton
6 Battery compartment with cover