Trotec BM31WP User Manual

4 EN
material moisture measuring device controlled via smartphone BM31WP
Information about the device
Device description
Used in combination with Trotec's MultiMeasure Mobile app the
material moisture measuring device permits material moisture
measurements of surfaces, especially screeds.
In case of individual measurements, the measurement value
display can be refreshed both via the app and by a brief
actuation of the measurement button at the measuring device.
Apart from the hold function, the measuring device can indicate
minimum, maximum and average values and carry out series
measurements.
In the app you can specify MAX and MINalarm thresholds for all
parameters measured with the device.
In case of a matrix measurement the measured values can be
displayed two-dimensionally (XY-diagram) with a background
image or grid.
The measurement results can be displayed and saved on the
terminal device either numerically or in form of a chart. Then,
the measurement data can be sent in PDF or Excelformat.
The app also includes a report generation function, an organiser
function, one for customer management and further analysis
options. Moreover, it is possible to share measurements and
project data with colleagues in another subsidiary.
If MultiMeasure Studio Professional is installed on a PC, you can
even use report templates and ready-made text blocks for
various fields of application to turn the data into professional
reports.
Device depiction
BM31WP
1
2
3
4
5
No. Designation
1 Measuring sensor
2 LED
3 On/ off/ measurement button
4 Battery compartment with cover
5 Lock
Technical data
Parameter Value
Model
Measuring principle capacitive/ dielectric measurement
method
Measuring range 0 to 100digits
Measuring range
resolution
0.1 digit
Penetration depth 40mm
General technical data
Bluetooth standard Bluetooth4.0, Low Energy
Transmission power 3.16mW (5dBm)
Radio range approx. 10m
(depending on measuring environment)
Operating
temperature
0°C to 50°C
Power supply 2x 1.5V batteries, typeAAA
Device switch-off after approx. 3minutes without active
Bluetooth connection
Protection type IP40
Weight approx. 93 g
Dimensions
(lengthx widthx
height)
22 mmx 36 mmx 160 mm
Scope of delivery
• 1x Device BM31WP
• 2x 1.5V battery AAA
• 1 x Wrist strap
• 1 x Quick guide
BM31WP

Trotec BM31WP Specifications

General

Brand	Trotec
Model	BM31WP
Category	Measuring Instruments
Language	English