Trotec pac 2000 e - Page 8

8 EN
local air conditioner PAC 2000 E
For installing the exhaust air hose please observe the following:
≥
30 cm
≤
150 cm
• Avoid kinks and bends in the exhaust air hose, as they
would lead to an accumulation of emitted humid air
causing the device to overheat and shut down.
• The dimensions of the exhaust air hose were especially
made to fit the device. Do not replace or extend the hose,
for it could cause a malfunction.
Opening the ventilation flaps
• Prior to switching the device on, open the horizontal
ventilation flaps at the air outlet(2). Adjust the ventilation
flaps to the desired position.
Connecting the power cable
• Insert the mains plug into a properly secured mains
socket.