Trotec PAE 49 - Replacing the Evaporation Filter; Evaporation Filter Replacement

20 EN
air cooler PAE 49 / PAE 50
Replacing the evaporation filter
Note
When set to air cooling mode, the device should not be
operated without the evaporation filter, otherwise
cooling will not work.
Note
Do not operate the device without an inserted air filter!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
The evaporation filter should be replaced in case of heavy
soiling.
In standard operation, the interval for replacing the evaporation
filter is approx. 1year.
Allow the evaporation filter to dry before removing it from the
device.
1. Remove the air filter and the evaporation filter from the
device.
2. Dispose of used evaporation filter according to the national
regulations.
3. Insert the new evaporation filter into the device.
4. Reinsert the air filter into the device.
Activities required after maintenance
If you want to continue using the device:
• Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
• Store the device according to the Storage chapter.