EasyManuals Logo

Trotec TA300 User Manual

Trotec TA300
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
EN 3
hot-wire anemometer TA300
Intended use
Only use the device for indoor measurements of air velocity,
volume flow and temperature within the measuring range
specified in the technical data. Observe and comply with the
technical data.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.
Improper use
Do not use the device in potentially explosive atmospheres, for
measurements in liquids or at live parts.
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Personnel qualifications
People who use this device must:
have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
The anemometer TA300 is a hot-wire anemometer for the
determination of air velocity, air temperature and volumetric
flow.
The device comes equipped with a hot-wire sensor and
microprocessor technology for signal amplification. This
combination guarantees precise measuring results.
Owing to the dual LCdisplay you can easily read the measuring
results even in poor lighting conditions.
The device can measure the following parameters:
Air velocity
– metres per second (m/s)
– feet per minute (ft/min)
– kilometres per hour (km/h)
– miles per hour (mph)
– nautical miles per hour in knots (kn)
Air volume flow
– CFM (cubic feet per minute)
– CMM (cubic metres per minute)
Air temperature
– degrees Celsius
– degrees Fahrenheit
Furthermore, a MAX/MINfunction and a HOLDfunction are
available for assessment of the measurements.
Optionally, it also possible to read and save measurement data
directly on a PC by means of the software included in the scope
of delivery.

Other manuals for Trotec TA300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trotec TA300 and is the answer not in the manual?

Trotec TA300 Specifications

General IconGeneral
BrandTrotec
ModelTA300
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals