Trotec T660 User Manual

T660
OPERATING MANUAL
MATERIAL MOISTURE
MEASURING DEVICE
EN
TRT-BA-T660-TC-001-EN

Trotec T660 Specifications

General

Penetration Depth	Up to 40 mm
Operating Temperature	0 °C to +50 °C
Measurement Range	0 to 200 digit
Resolution	0.1 digit
Display	LCD

Summary

Device Description and Overview

Product Description and Features

Explains the T660 as a dielectric humidity sensor for non-destructive moisture detection.

Device Depiction and Controls

Technical Specifications and Safety Guidelines

Device Technical Data

Safety Precautions and Residual Risks

Essential safety warnings, improper use, personnel qualifications, and residual risks.

Operation and Handling Procedures

Battery Installation and Powering On

Steps for battery insertion and the procedure to switch on the device, including calibration.

Measurement Processes

Performing a Material Measurement

Step-by-step guide on how to correctly hold and position the device for accurate measurements.

Comparative Measurement Techniques

Device Configuration and Settings

Accessing and Navigating Configuration

Setting Alarm Thresholds and Levels

How to set a limit value for the alarm function, including acoustic and visual alerts.

Advanced Measurement Functions

Material Selection and Offset Calibration

Selecting construction materials and setting calibration offsets for accurate measurements.

Measuring Modes and Data Management

Measurement Interpretation Principles

Dielectric Measurement Principles

Key considerations and factors influencing the dielectric measurement principle and accuracy.

Assessing Wood Moisture Content

Building Material Analysis and Software

Building Material Moisture Zones

PC Software System Requirements

Minimum system requirements for installing the MultiMeasure Studio PC software.

Software Installation and Troubleshooting

Installing and Connecting PC Software

Troubleshooting Common Errors

Device Maintenance and Battery Replacement